Creator of this project
CC_BY_SA
Iris Box

This is a remix of "Preassembled Iris Box" by emmett. This may be good challenge that how you understand 3D printing.

Source: Thingiverse

Printer:

m200 (hand made)

Rafts:

No

Supports:

No

Resolution:

width 0.34 mm, thickness 0.17 mm

Infill:

30%

Notes:

Print conditions.

Printer name: hand made, m200 Slicer: Simplify3D Firmware: Repetier

Filament: 3DXTech CFR-PETG Nozzle: 0.3mm stainless Print width: 0.34mm Layer height: 0.17mm Injection ratio: lower Retraction length: 0.75mm

Layers: top 5, bottom 4, side 3 Infill: 30% Skirt: 5 turns, 0.5mm gap Support: none Raft: none

Temprature: 260 C

Speed: 1800mm/min, 80% at outline, infill, support, 25% in small areas Jerk: 15 Acceleration: 1600mm/sec^2

Print size: 75% of original Print time: 12 hours

Slider images
Name Date Size File
1. 0287044e7969ec86759040c8c792e770_preview_featured.jpg 2018-05-02 42.66 KiB
2. 6590b0563cae144c5397d0a26ad45800_preview_featured.jpg 2018-05-02 39.48 KiB
3. e1509e6534d8a57811e7a7b576f3d0b5_preview_featured.jpg 2018-05-02 41.63 KiB
List of blueprints
Name Date Size File
1. NS_Iris_Box_fuji5.stl 2018-05-02 3.17 MiB
2. NS_Iris_Box_fuji5_8.stl 2018-05-02 499.59 KiB
3D Model

Copyright © 2018 ENVIENTA Association